Supported agents
UULink runs coding agents that you install on your own Mac. It currently supports 8: Claude Code, Codex, Cursor, opencode, Qoder CLI, DeepSeek Harness, Pi and Antigravity. You choose one when you start a session; an existing session keeps the agent it was created with.
The basics work the same with every agent: sending messages, viewing tool calls, switching models, and browsing and resuming past sessions. The differences are described in each section below and in the comparison at the end.
UULink charges nothing extra for any agent. The subscription only covers the number of Macs, push notifications, sending files and web pages to your phone, image attachments and Live Activity. Each agent uses your own account, subscription or API key, and any usage fees are charged by that provider.
Adding an agent in UULink
Section titled “Adding an agent in UULink”Install and sign in to the agent on your Mac first. Then open UULink on the Mac and go to Settings › Agent:
- The list on the left shows the agents you’ve added, each with its detected version, or Not Detected if the executable can’t be found. Claude Code, Codex, opencode and Pi are in the list by default.
- Click + at the bottom left to add another agent (Cursor, Qoder CLI, DeepSeek Harness, Antigravity); click − to remove the selected one.
- The right side shows the selected agent’s settings: display name, the Enable switch, the executable (detected automatically, or choose one with Choose…), and environment variables (for API keys, proxies and so on). Click Detect Again after making changes.
When an agent isn’t detected, UULink shows how to install it and a link to its website. Once detected, you can choose it when starting a new session on your iPhone. The first step of the setup assistant shown on first launch uses the same view.
Claude Code
Section titled “Claude Code”A coding agent by Anthropic that reads and edits code and runs commands in the terminal. Website · Install docs
- Install: run the official install script in Terminal,
curl -fsSL https://claude.ai/install.sh | bash, or install with Homebrew:brew install --cask claude-code. - Sign in: run
claudeand follow the prompts to sign in to your Claude account in the browser (requires a Pro, Max, Team, Enterprise or Console account). UULink uses this sign-in and subscription; no separate API key is needed. - In UULink: in the list by default. If the sign-in expires, you can sign in again from your iPhone: open this Mac’s Info page, tap Claude Code, then Account › Sign In to Claude Code….
- Features: everything is supported, including permission modes (with Plan), subscription usage, continuing terminal sessions on your phone, and deleting sessions.
- Continuing in Terminal: sessions started in UULink don’t appear in the session list of
claude --resumein Terminal; resume them by session ID instead. See the FAQ.
A coding agent by OpenAI (Codex CLI). Website · Install docs
- Install: run the official install script in Terminal,
curl -fsSL https://chatgpt.com/codex/install.sh | sh, or install with npm,npm install -g @openai/codex, or Homebrew,brew install --cask codex. If the ChatGPT desktop app is installed, the Codex bundled with it is detected automatically. - Sign in: run
codex loginto sign in with your ChatGPT account, or use an OpenAI API key. - In UULink: in the list by default. You can also sign in from your iPhone: start it on the account page and authorize with a ChatGPT device code.
- Features: permission modes and model switching, approving commands and edits on your phone, continuing terminal sessions, and deleting sessions. Warnings from Codex appear as banners in the session.
Cursor
Section titled “Cursor”The command-line coding agent by Cursor (Cursor CLI). Website · Install docs
- Install: run the official install script in Terminal,
curl https://cursor.com/install -fsS | bash. - Sign in: run
agent loginto sign in to your Cursor account in the browser, or setCURSOR_API_KEYin UULink’s environment variables. - In UULink: click + in Settings › Agent and add Cursor. UULink looks for the
cursor-agentexecutable. - Features: Agent / Plan / Ask modes, switched in the session settings; approve commands and edits, answer its multiple-choice questions and review its plans on your phone. Model parameters such as reasoning effort (names and values vary by model) can be chosen separately in the session settings; “Default model” is Cursor’s Auto.
- How model changes apply: Cursor’s model and its parameters are a global setting — only one is in effect at a time, regardless of session. UULink remembers the model chosen for each session and switches to it before that session sends a message, so changes apply from the next message; when it differs from the model used for the previous message, the switch takes a few seconds before sending.
- Limitations: sessions can’t be deleted. When two Cursor sessions are processing messages at the same time, the switch before one session sends may change the model used for the other session’s reply in progress, so that reply may come from the model chosen in the other session. If you need different models, wait for one session to finish replying before sending to the other.
opencode
Section titled “opencode”An open-source coding agent that works with many model providers. UULink supports OpenCode 2. Website · Install docs
- Install: run the official OpenCode 2 install script in Terminal,
curl -fsSL https://opencode.ai/v2/install | bash, or install with npm:npm install -g @opencode/cli. - Sign in: run
opencode auth loginto connect a model provider. The built-in free models need no sign-in. - In UULink: in the list by default; UULink uses opencode’s own credentials.
- Features: models are chosen as provider / model, the mode (build / plan) is switched in the session settings, and you can approve commands and edits on your phone and delete sessions. It doesn’t use Claude Code’s permission modes.
Qoder CLI
Section titled “Qoder CLI”A command-line coding agent by Alibaba. Website · Install docs
- Install: run the official install script in Terminal,
curl -fsSL https://qoder.com/install | bash. - Sign in: run
qodercli loginto sign in to your Qoder account. - In UULink: click + in Settings › Agent and add Qoder CLI.
- Features: Ask Each Time, Accept Edits and Bypass Permissions modes and model switching; approve commands and edits on your phone and delete sessions.
- Limitations: no Plan mode.
DeepSeek Harness
Section titled “DeepSeek Harness”An open-source agent harness by DeepSeek; the command is dsh. It is currently in developer preview. Website · Docs
- Install: after installing Node.js, run
npm install -g @deepseek-ai/dshin Terminal. This command is derived from the npm package name rather than quoted from the official docs; follow the official docs if they differ. - Sign in: no sign-in; it uses a DeepSeek API key. Create one on the DeepSeek Platform, then add the
DEEPSEEK_API_KEYenvironment variable for DeepSeek Harness in Settings › Agent. - In UULink: click + in Settings › Agent and add DeepSeek Harness.
- Features: approve commands and edits on your phone, switch models and delete sessions.
- Limitations: UULink shows only sessions started in UULink; sessions started in dsh’s own web interface don’t appear.
A minimal, extensible open-source coding agent by Earendil that works with many model providers. Website · Docs
- Install: run the official install script in Terminal,
curl -fsSL https://pi.dev/install.sh | sh, or install with npm (requires Node.js 22.19 or later):npm install -g --ignore-scripts @earendil-works/pi-coding-agent. - Sign in: run
piand enter/loginto sign in to a subscription or enter an API key. You can also add your provider’s API key environment variable (such asANTHROPIC_API_KEY) for Pi in Settings › Agent. - In UULink: in the list by default.
- Features: model switching, browsing and resuming history (including sessions started in Terminal), and deleting sessions.
- Limitations: Pi doesn’t support MCP, so it can’t send files or web pages to your phone or control the Mac desktop yet. It has no permission modes; commands and edits run without approval on your phone.
Antigravity
Section titled “Antigravity”A coding agent by Google. UULink uses it through its command-line tool agy, sharing sessions with agy in Terminal. Website · Docs
-
Install: after installing Homebrew, run this in Terminal:
终端窗口 brew install --cask antigravity-cli -
Sign in: run
agyin Terminal and follow the prompts to sign in to your Google account. -
In UULink: off by default. Click + in Settings › Agent to add Antigravity; it’s ready once installed and signed in.
-
Features: model and thinking-level switching; approve commands and edits on your phone; sessions started with
agyin Terminal can be continued on your phone. When Antigravity asks you a question, a card with choices appears; tap to answer. -
Limitations: sessions can’t be deleted; no permission modes; images can’t be sent.
Comparison
Section titled “Comparison”Every agent supports sending messages, viewing tool calls, switching models, and browsing and resuming sessions started in UULink.
| Permission modes | Approve on phone | Delete sessions | Continue terminal sessions | Files, web pages, desktop control | |
|---|---|---|---|---|---|
| Claude Code | Yes | Yes | Yes | Yes | Yes |
| Codex | Yes | Yes | Yes | Yes | Yes |
| Cursor | Agent / Plan / Ask modes instead | Yes | No | Yes | Yes |
| opencode | build / plan modes instead | Yes | Yes | Yes | Yes |
| Qoder CLI | Yes (no Plan) | Yes | Yes | Yes | Yes |
| DeepSeek Harness | No | Yes | Yes | No | Yes |
| Pi | No | No | Yes | Yes | No |
| Antigravity | No | Yes | No | Yes | Yes |